Halco 83086 LED A19 11W 4000K GU24 NON-DIMMABLE OMNIDIRECTIONAL ProLED

Halco 83086 LED A19 11W 4000K GU24 NON-DIMMABLE OMNIDIRECTIONAL ProLED

Halco 83086 LED A19 11W 4000K GU24 NON-DIMMABLE OMNIDIRECTIONAL ProLED
Halco 83085 LED A19 11W 3000K GU24 NON-DIMMABLE OMNIDIRECTIONAL ProLED

Halco 83085 LED A19 11W 3000K GU24 NON-DIMMABLE OMNIDIRECTIONAL ProLED

Halco 83087 LED A19 14.5W 2700K GU24 NON-DIMMABLE OMNIDIRECTIONAL ProLED

Halco 83087 LED A19 14.5W 2700K GU24 NON-DIMMABLE OMNIDIRECTIONAL ProLED

  • SKU:83086
  • UPC:807154830862

Lumens

1100

Wattage

11

Watt Eq

75

CCT

4000K

43869 43803
$7.24
In stock
  • Buy 6 for $6.74 each and save 7%
More Information
Average Life (Hrs) 15000
Base Material Aluminum
Base Type GU24
Bulb Type A19
Color Temperature 4000
CRI 82
Initial Lumens 1100
Input Current (mps) 0.116
Input Frequency (Hz) 50/60
Operating Position Universal
Product Category LED
Reflector material Plastic
Voltage (V) 120
Watt Equivalent 75
Wattage (W) 11
Beam Angle OMNIDIRECTIONAL
Beam Spread 230
Finish FROSTED
Inner Carton Quantity 6
Markets Commercial, Hospitality, Residental
Master Carton Quantity 24
Maximum Ambient Temperature (C) 40
Maximum Overall Diameter 2.36
Maximum Overall Length 4.29
Mercury Content(Hg) 0
Minimum Starting Temperature (C) -20
Nominal Length 4.29
Power Factor 0.7
Product Code A19FR11/840/OMNI/GU24/LED
UPC 807154830862
Warranty (Yrs) 3
Write Your Own Review
You're reviewing:Halco 83086 LED A19 11W 4000K GU24 NON-DIMMABLE OMNIDIRECTIONAL ProLED
Color Temperature in Kelvin(K) Degrees
4000K
1500K 2000K3000K4000K5000K6000K7000K8000K9000K

Description

LED A19 11W 4000K GU24 NON-DIMMABLE OMNIDIRECTIONAL ProLED


Notes:
  • Non-Dimmable 120V lamps should only be used on 120V circuits. Not for use on dimmers; timing devices;photo sensors or occupancy sensors.
  • Caution: Risk of electric shock. Never disassemble or modify the bulb; no user serviceable parts inside.To avoid burns; do not touch the bulb during operation and allow to cool completely after switching off. This device is not intended for use in emergency exit fixtures. This device complies with Part 18 of the FCC rules. This product may cause interference with other devices. If interference occurs; change the location of the products involved.
  • Do not use where directly exposed to water.
  • UL listed for enclosed fixtures

Warnings:
  • Use only on 120 volts; 60-hertz frequency
  • Do not use where directly exposed to water
  • Never disassemble or modify the bulb
  • To avoid burns; do not touch the bulb during operation and allow to cool completely after switching off
  • This device is not intended for use with emergency exit fixtures
  • Not for use on dimmers; timing devices; photo sensors or occupancy sensors
  • If this product causes interference with other devices; change the location of the products involved