Halco 83093 LED A19 4.2/8.5/13.5W 5000K 3-WAY E26 ProLED

Halco 83093 LED A19 4.2/8.5/13.5W 5000K 3-WAY E26 ProLED

Halco 83093 LED A19 4.2/8.5/13.5W 5000K 3-WAY E26 ProLED
Halco 83092 LED A19 4.2/8.5/13.5W 4000K 3-WAY E26 ProLED

Halco 83092 LED A19 4.2/8.5/13.5W 4000K 3-WAY E26 ProLED

Halco 80192 LED A19 HIGH CRI 10W 2700K DIMMABLE OMNIDIRECTIONAL JA8-2016-E

Halco 80192 LED A19 HIGH CRI 10W 2700K DIMMABLE OMNIDIRECTIONAL JA8-2016-E

  • SKU:83093
  • UPC:807154830930

Lumens

480/880/1550

Wattage

13.5/ 4.2/ 8.5

Watt Eq

40

CCT

5000K

43869 43803
$20.29
In stock
  • Buy 6 for $18.89 each and save 7%
More Information
Average Life (Hrs) 15000
Base Material Nickel plated Aluminum
Base Type Medium
Bulb Type A19
Color Temperature 5000
CRI 82
Initial Lumens 480/880/1550
Input Current (mps) 0.116
Input Frequency (Hz) 60
Lens Frost
Operating Position Universal
Product Category LED
Voltage (V) 120
Watt Equivalent 40/60/100
Wattage (W) 13.5, 4.2, 8.5
Beam Angle Omnidirectional
Beam Spread 230
Inner Carton Quantity 6
Markets & Showrooms, Hospitality, Office, Residential
Master Carton Quantity 24
Maximum Ambient Temperature (C) 104
Maximum Overall Diameter 2.362
Maximum Overall Length 4.646
Mercury Content(Hg) 0
Minimum Starting Temperature (C) -4
Nominal Length 4.646
Power Factor 0.9
Product Code 83093
UPC 807154830930
Warranty (Yrs) 3
Write Your Own Review
You're reviewing:Halco 83093 LED A19 4.2/8.5/13.5W 5000K 3-WAY E26 ProLED
Color Temperature in Kelvin(K) Degrees
5000K
1500K 2000K3000K4000K5000K6000K7000K8000K9000K

Description

LED A19 4.2/8.5/13.5W 5000K 3-WAY E26 ProLED


Notes:
  • Caution: Risk of electric shock. Never disassemble or modify the bulb; no user serviceable parts inside.To avoid burns; do not touch the bulb during operation and allow to cool completely after switching off. This device is not intended for use in emergency exit fixtures. This device complies with Part 18 of the FCC rules. This product may cause interference with other devices. If interference occurs; change the location of the products involved.
  • Do not use where directly exposed to water.

Warnings:
  • Use only on 120 volts; 60-hertz frequency
  • Risk of electric shock
  • Do not use where directly exposed to water
  • Never disassemble or modify the bulb
  • To avoid burns; do not touch the bulb during operation and allow to cool completely after switching off
  • This device is not intended for use with emergency exit fixtures
  • If this product causes interference with other devices; change the location of the products involved
  • Rated for ICAT fixtures
  • UL rated for damp location