Halco 85052 B11 120V 2.5W 2700K E12 FROSTED ProLED

Halco 85052 B11 120V 2.5W 2700K E12 FROSTED ProLED

Halco 85052 B11 120V 2.5W 2700K E12 FROSTED ProLED
Halco 85055 B11 120V 3.8W 2700K E26 CLEAR ProLED

Halco 85055 B11 120V 3.8W 2700K E26 CLEAR ProLED

Halco 85053 B11 120V 4.5W 3000K E12 CLEAR ProLED

Halco 85053 B11 120V 4.5W 3000K E12 CLEAR ProLED

  • SKU:85052
  • UPC:807154850525

Lumens

160

Wattage

2.5

Watt Eq

25

CCT

2700K

43869 43803 43726
$3.61
In stock
  • Buy 10 for $3.36 each and save 7%
More Information
Average Life (Hrs) 15000
Base Material Aluminum
Base Type E12
Bulb Type B11
Color Temperature 2700
CRI 82
Initial Lumens 160
Input Frequency (Hz) 60
Operating Position Universal
Product Category LED
Voltage (V) 120
Watt Equivalent 25
Wattage (W) 2.5
Beam Angle Omnidirectional
Beam Spread 300
Finish Frosted
Inner Carton Quantity 10
Markets Hospitality, Light Commercial, Residential
Master Carton Quantity 100
Power Factor 0.9
Product Code B11FR2/ANT/827/LED2
UPC 807154850525
Warranty (Yrs) 3
Write Your Own Review
You're reviewing:Halco 85052 B11 120V 2.5W 2700K E12 FROSTED ProLED
Color Temperature in Kelvin(K) Degrees
2700K
1500K 2000K3000K4000K5000K6000K7000K8000K9000K

Description

B11 120V 2.5W 2700K E12 FROSTED ProLED


Notes:
  • Dimmable 120V lamps should only be used on 120V circuits. Lamps are designed for use with an analog dimmer and these products may not be compatible with all dimming devices. Lamps should be tested in the application prior to full installations on circuits using such devices. Not for use on timing devices; photosensors;digital dimmers or occupancy sensors. Ensure minimum dimmer load is met for best performance.
  • Caution: Risk of electric shock. Never disassemble or modify the bulb; no user serviceable parts inside.To avoid burns; do not touch the bulb during operation and allow to cool completely after switching off. This device is not intended for use in emergency exit fixtures. This device complies with Part 18 of the FCC rules. This product may cause interference with other devices. If interference occurs; change the location of the products involved.
  • Do not use where directly exposed to water.
  • Do not use in totally enclosed fixtures or IC or ICAT rated recessed cans.
  • Dimmable lamps dim down to 5%; but are limited by the dimming device range.

Warnings:
  • Use only on 120 volts; 60-hertz frequency
  • Risk of electric shock
  • Do not use where directly exposed to water
  • Never disassemble or modify the bulb
  • Do not use in totally enclosed fixtures
  • This device is not intended for use with emergency exit fixtures
  • If this product causes interference with other devices; change the location of the products involved
  • Dimmable 120V lamps should be used only on 120V circuits. Lamps are designed for use with analog dimmer and these products may not be compatible with all dimming
  • Dimmable lamps dim down to 5%; but are limited by the dimming device range
  • This device is intended for use on Class 2 circuits only