Halco 80791 LED T5 1W 10-18V 3000K MINI-WEDGE P

Halco 80791 LED T5 1W 10-18V 3000K MINI-WEDGE P

Halco 80791 LED T5 1W 10-18V 3000K MINI-WEDGE P
Halco 80692 LED JC LED 1.5W 10-18V 3000K BA15S

Halco 80692 LED JC LED 1.5W 10-18V 3000K BA15S

Halco 80815 LED JC LED 2.4W 10-18V 5000K G4 PRO

Halco 80815 LED JC LED 2.4W 10-18V 5000K G4 PRO

  • SKU:80791
  • UPC:807154807918

Lumens

75

Wattage

1

CCT

3000K

43726
$11.19
In stock
  • Buy 10 for $10.42 each and save 7%
More Information
Average Life (Hrs) 20000
Base Material Plastic
Base Type Plastic Wedge
Bulb Type Plastic Wedge
Color Temperature 3000
CRI 82
Initial Lumens 75
Input Frequency (Hz) 60
Operating Position Universal
Product Category LED
Voltage (V) 10-18
Wattage (W) 1
Inner Carton Quantity 10
Markets Commercial, Residential
Master Carton Quantity 100
Maximum Overall Diameter 0.4
Maximum Overall Length 1.18
Mercury Content(Hg) 0
Nominal Length 1.18
Product Code 912/1WW/LED
UPC 807154807918
Write Your Own Review
You're reviewing:Halco 80791 LED T5 1W 10-18V 3000K MINI-WEDGE P
Color Temperature in Kelvin(K) Degrees
3000K
1500K 2000K3000K4000K5000K6000K7000K8000K9000K

Description

LED T5 1W 10-18V 3000K MINI-WEDGE P


Notes:
  • Caution: Risk of electric shock. Never disassemble or modify the bulb; no user serviceable parts inside.To avoid burns; do not touch the bulb during operation and allow to cool completely after switching off. This device is not intended for use in emergency exit fixtures. This device complies with Part 18 of the FCC rules. This product may cause interference with other devices. If interference occurs; change the location of the products involved.
  • Do not use where directly exposed to water.
  • Approved for use in sealed metal landscape fixtures.

Warnings:
  • Risk of electric shock
  • Never disassemble or modify the bulb
  • To avoid burns; do not touch the bulb during operation and allow to cool completely after switching off
  • This device is not intended for use with emergency exit fixtures
  • Not for use on dimmers; timing devices; photo sensors or occupancy sensors
  • If this product causes interference with other devices; change the location of the products involved
  • Use only on 10-18 volt circuits
  • Suitable for use in sealed metal landscape fixtures; where it is protected from the elements
  • Not rated for damp or wet locations