Halco 81998 LED JC 1.2W 3000K G4 OMNIDIRECTIONAL  IP65 PROLED

Halco 81998 LED JC 1.2W 3000K G4 OMNIDIRECTIONAL IP65 PROLED

Halco 81998 LED JC 1.2W 3000K G4 OMNIDIRECTIONAL IP65 PROLED
Halco 81102 1.2 3000K Wedge

Halco 81102 1.2 3000K Wedge

Halco 81999 LED JC 1.6W 3000K G4 OMNIDIRECTIONAL IP65 PROLED

Halco 81999 LED JC 1.6W 3000K G4 OMNIDIRECTIONAL IP65 PROLED

  • SKU:81998
  • UPC:807154819980

Lumens

110

Wattage

1.2

Watt Eq

10

CCT

3000K

44629
$8.42
In stock
  • Buy 10 for $7.84 each and save 7%
More Information
Average Life (Hrs) 15000
Base Type G4
Bulb Type JC
Color Temperature 3000
CRI 82
Initial Lumens 110
Input Frequency (Hz) 60
Operating Position Universal
Product Category LED
Voltage (V) 10-15
Watt Equivalent 10
Wattage (W) 1.2
Beam Spread Omni
Inner Carton Quantity 10
Markets Landscape
Master Carton Quantity 100
Maximum Overall Diameter 0.37
Maximum Overall Length 1.18
Mercury Content(Hg) 0
Minimum Starting Temperature (C) -40
Nominal Length 1.18
Power Factor 0.9
Product Code 81998
UPC 807154819980
Warranty (Yrs) 1
Write Your Own Review
You're reviewing:Halco 81998 LED JC 1.2W 3000K G4 OMNIDIRECTIONAL IP65 PROLED
Color Temperature in Kelvin(K) Degrees
3000K
1500K 2000K3000K4000K5000K6000K7000K8000K9000K

Description

LED JC 1.2W 3000K G4 OMNIDIRECTIONAL IP65 PROLED


Notes:
  • Caution: Risk of electric shock. Never disassemble or modify the bulb; no user serviceable parts inside.To avoid burns; do not touch the bulb during operation and allow to cool completely after switching off. This device is not intended for use in emergency exit fixtures. This device complies with Part 18 of the FCC rules. This product may cause interference with other devices. If interference occurs; change the location of the products involved.
  • Approved for use in sealed metal landscape fixtures.

Warnings:
  • Risk of electric shock
  • Never disassemble or modify the bulb
  • To avoid burns; do not touch the bulb during operation and allow to cool completely after switching off
  • This device is not intended for use with emergency exit fixtures
  • Not for use on dimmers; timing devices; photo sensors or occupancy sensors
  • If this product causes interference with other devices; change the location of the products involved
  • Use only on 10-15 volt circuits